SonyUserforum
Amazon
Forum für die Fotosysteme von Sony und KonicaMinolta
  SonyUserforum - Forum für die Fotosysteme
von Sony und KonicaMinolta
 
Registrieren Rund ums Bild Galerie Objektiv-Datenbank Kalender Forenregeln Nützliches

Startseite » Forenübersicht » Treffpunkt » Die Glaskugel » Was neues zu dem LAEA4 Adapter: Umbau auf OnChip-AF für Stangenobjektive
Antwort
 
Themen-Optionen Ansicht
Alt 15.08.2020, 18:42   #1
embe
 
 
Registriert seit: 11.02.2013
Ort: Südbaden
Beiträge: 6.165
Ich vermute, weil an der A99ii auch nur das innere Fokusfeld aktiv ist.
Und da die Libelle im Flug drinnen zu halten - herausfordernd!
__________________
Viele Grüße,
Michael

Do what you can, with what you've got, where you are.
Bill Widener, of Widener Valley, Virginia, as quoted by Theodore Roosevelt in 'An Autobiography'
embe ist offline   Mit Zitat antworten
Sponsored Links
Alt 15.08.2020, 18:55   #2
Robert Auer
 
 
Registriert seit: 17.11.2012
Ort: Schwerin
Beiträge: 6.811
Zitat:
Zitat von embe Beitrag anzeigen
Ich vermute, weil an der A99ii auch nur das innere Fokusfeld aktiv ist.
Und da die Libelle im Flug drinnen zu halten - herausfordernd!
Ich kann mir nur dies als Erklärung vorstellen.
__________________
robert uer

Grüße aus Schwerin, der romantischen Sieben-Seen-Stadt in Ostsee-Nähe
(=> nur ~30km zur German Riviera )
Robert Auer ist offline   Mit Zitat antworten
Alt 16.08.2020, 00:03   #3
Tobbser
 
 
Registriert seit: 09.04.2017
Ort: LU, CH
Beiträge: 2.861
Hoi zsamme,

drei Minuten vor Ladenschluss kommt Gary Friedman noch um die Ecke mit einem weiteren Update (ob er sich mein Datum gemerkt hat...):

Hier seine Mail:

Hi, all.

A few things have happened since my last update. Let me summarize them for you here:

500mm f/8 Mirror Lens

For the first time in my life, the Minolta 500mm f/8 mirror lens (sometimes called a “reflex” lens – it uses mirrors instead of conventional optics like a telescope; resulting in a very small and light lens with a long reach) can do something it’s never been able to do before. Because its fixed f/stop is so small, earlier cameras would switch to a fixed, center focusing point whenever the lens was attached. This was because, historically, the center focusing point was more sensitive and sometimes was made as a “cross-point” sensor, able to recognize both vertical and horizontal contrast.

Anyway, on the Monster Adapter it works just like any other lens – your focus point can be anywhere the camera allows, eye AF and tracking are both enabled! The focusing speed is a little slower than when used with an A99 II (my reference camera in handling tests), but it’s not bad.

Here’s a quick test video I threw together to demonstrate: https://youtu.be/Qrt9PesBkR0 This has 3 tests; the first showing off Eye AF, the 2nd showing the lens on an A99 II for reference, and the 3rd showing a similar test on an A7R IV.

As with the other lenses, just don’t try to shoot sports with this setup.

Version 0.2 should be in my hands next week

Here’s a new, comprehensive list of all the lenses that the upcoming Firmware v0.2 promises to support:
• Minolta/Sony AF 20 2.8
• Minolta AF 24/2.8
• Minolta AF 28/2
• Minolta AF 35/1.4
• Minolta/Sony AF 35/1.4 G
• Minolta AF 35/2.0
• Minolta/Sony AF 50/1.4
• Minolta AF 50/1.7
• Minolta AF 85/1.4 G/GD/GD Limited
• Sony Planar T* 85/1.4 ZA
• Minolta AF 100/2.0 (the Portrait lens, not the macro lens)
• Sony Sonnar T* 135/1.8 ZA
• Minolta AF 200/2.8 APO
• Minolta/Sony AF 500/8 Reflex
Minolta/Sony AF 16mm F2.8 Fisheye
Minolta/Sony AF 28mm F2.8
Minolta/Sony AF 50mm F2.8 Macro (D)
Minolta AF 50mm F3.5 Macro
Minolta/Sony AF 100mm F2.8 Macro (D)
Minolta AF 100mm F2.8 Soft Focus
Minolta AF 135mm F2.8
Minolta AF 300mm F4 HS-APO G
Minolta AF 17-35mm F3.5 G
Minolta AF 28-70mm F2.8 G
Minolta AF 70-210mm F4 Macro
Minolta AF 80-200mm F2.8 HS-APO G

A7R IV Firmware Update

Last week Sony came out with a firmware update for the A7R IV, and I was told not to do the update, as it broke the functionality of the Monster adapter. So the bad news is this thing is vulnerable to external firmware updates. The good news is it was discovered and fixed within the week – I don’t know of any manufacturer that fixes bugs that quickly. 

Additional FAQs (over and above the ones already published in previous updates)

Q: Will this adapter make my lenses focus faster than the LA-EA4?
A: Probably not.. The goal is to add new intelligent focusing modes that you can’t get with the LA-EA4. Do not expect increased speed to be the primary benefit.
Q: Will you be able to easily reinstall or remove the AF mirror in case you wanted to use other lenses not on the list - in current LA-EA4 mode?
A: You can restore the mirror if you want to, but if you want to go back to the old functionality, you’ll have to restore the original circuit board.
Q: Will this adapted LA-EA4 likely to have better performance with SSM lens than the LA-EA3 - once the firmware is developed? Or will it just operate pretty much the same - no Eye AF or slower foculsing speed, for instance.
A: Don’t know; and right now it’s a moot question since the developer decided to prioritize adding lenses over adding support for SSM and SAM lenses. Maybe one day, but right now I’d say it’s best not to expect that support should you decide to get this.

So What’s Next, Gary?
Still not sure if I’m going to take this on. I’m hoping to get firmware version 0.2 next week, and I’ll put it through its paces once again. And of course I’ll keep you informed of progress.

Have a great week!

Sincerely, Gary
---------------
Hört sich alles ganz gut an oder habe ich etwas übersehen?

Liebe Grüße

Tobias

Geändert von ddd (16.08.2020 um 13:30 Uhr) Grund: 500/8 Reflex und Fisheye Zeilenumbruch eingefügt
Tobbser ist offline   Mit Zitat antworten
Alt 16.08.2020, 01:25   #4
Robert Auer
 
 
Registriert seit: 17.11.2012
Ort: Schwerin
Beiträge: 6.811
Klingt danach, als ob wir die Platinen bereits mit Firmware v02 bekommen und dass es dem Entwickler gelungen ist, das Problem mit dem A7RIV Firmware-Update v1.20 mit der Platinen-Firmware v02 zu lösen! Das klingt schon mal sehr gut!
Alles andere ist bekannt bzw. wurde von mir so erwartet! Gut, dass das 16F2.8 Fisheye nun doch (noch) nicht bei den unterstützten Objektiven dabei ist, scheint mir akzeptabel. Ich bleibe trotzdem bei meiner Bestellung von zwei Platinen.
__________________
robert uer

Grüße aus Schwerin, der romantischen Sieben-Seen-Stadt in Ostsee-Nähe
(=> nur ~30km zur German Riviera )
Robert Auer ist offline   Mit Zitat antworten
Alt 16.08.2020, 01:39   #5
Tobbser
 
 
Registriert seit: 09.04.2017
Ort: LU, CH
Beiträge: 2.861
Hoi zsamme,

die Nachrichten bzw. Mails an alle sind raus.

Eine Frage ist bereits aufgetaucht betreffend Versand:

Ich verschicke es in Deutschland mit dem versicherten Paket für 5€ per DHL.


Robert hatte noch den sehr sinnvollen Einfall zur korrekten Abrechnung euren Anteil an meinem Adapter von der anderen Überweisung zu trennen und einzeln bzw. mit einem eventuellen Obolus zu überweisen.

Beide Infos gibt es jetzt nochmals als PN bzw. Mail.

Gute Nacht und liebe Grüße

Tobias
Tobbser ist offline   Mit Zitat antworten
Sponsored Links
Alt 16.08.2020, 06:43   #6
Jumbolino67
 
 
Registriert seit: 10.12.2007
Ort: Poggibonsi / Italien
Beiträge: 1.718
Zitat:
Zitat von Robert Auer Beitrag anzeigen
Klingt danach, als ob wir die Platinen bereits mit Firmware v02 bekommen und dass es dem Entwickler gelungen ist, das Problem mit dem A7RIV Firmware-Update v1.20 mit der Platinen-Firmware v02 zu lösen! Das klingt schon mal sehr gut!
Wenn unsere Platinen noch von der ersten Charge stammen sollten, wovon ich ausgehe, dann wird da noch v01 drauf sein. Falls die erste Charge schon ausverkauft sein sollte und wir von einer späteren Charge bedient werden, dann könnte schon die v02 aufgespielt sein. Aber ich denke nicht, daß die bei Taobao gelagerten Platinen die v02 aufgespielt bekommen.

Zitat:
Zitat von Robert Auer Beitrag anzeigen
Alles andere ist bekannt bzw. wurde von mir so erwartet! Gut, dass das 16F2.8 Fisheye nun doch (noch) nicht bei den unterstützten Objektiven dabei ist, scheint mir akzeptabel. Ich bleibe trotzdem bei meiner Bestellung von zwei Platinen.
Doch, das 16F2.8 Fisheye ist dabei, das ist Gary Friedman nur in der Liste verrutscht, es steht beim 500/8R .
__________________
flickr

Geändert von Jumbolino67 (16.08.2020 um 06:45 Uhr)
Jumbolino67 ist offline   Mit Zitat antworten
Alt 16.08.2020, 11:09   #7
Tobbser
 
 
Registriert seit: 09.04.2017
Ort: LU, CH
Beiträge: 2.861
Hoi zsamme,

Pittisoft hat gerade noch einen wichtigen Punkt angesprochen, den ich nicht ausformuliert habe.

Alle die den LA-EA4 von mir umbauen lassen, bekommen natürlich die ausgebaute Platine mitgeschickt (in der Vepackung der neuen, im selben Paket mit dem umgebauten LA-EA4).
Tobbser ist offline   Mit Zitat antworten
Alt 16.08.2020, 11:16   #8
DerGoettinger
 
 
Registriert seit: 02.04.2019
Ort: Lübeck
Beiträge: 1.193
Zitat:
Zitat von Jumbolino67 Beitrag anzeigen
Wenn unsere Platinen noch von der ersten Charge stammen sollten, wovon ich ausgehe, dann wird da noch v01 drauf sein. Falls die erste Charge schon ausverkauft sein sollte und wir von einer späteren Charge bedient werden, dann könnte schon die v02 aufgespielt sein. Aber ich denke nicht, daß die bei Taobao gelagerten Platinen die v02 aufgespielt bekommen.
Mal eine Frage:
Wenn ich es richtig verstanden habe, dann kann man ein Update ja selber machen. Irgendwer hatte ja geschrieben, dass das per Software-Update geht über PC mit Adapter an der Kamera. Aber wo bekommen die Updates her?
DerGoettinger ist offline   Mit Zitat antworten
Alt 16.08.2020, 11:20   #9
jsffm
 
 
Registriert seit: 31.01.2007
Ort: Frankfurt/M
Beiträge: 2.065
Download im Internet?
Die Adresse findet schon jemand raus. Ich hoffe, dass die Update software bis dahin auch englisch kann.
__________________
Grüße aus Frankfurt,

Jürgen

Flickr APS-C lebt!
jsffm ist offline   Mit Zitat antworten
Antwort
Startseite » Forenübersicht » Treffpunkt » Die Glaskugel » Was neues zu dem LAEA4 Adapter: Umbau auf OnChip-AF für Stangenobjektive


Forenregeln
Es ist dir nicht erlaubt, neue Themen zu verfassen.
Es ist dir nicht erlaubt, auf Beiträge zu antworten.
Es ist dir nicht erlaubt, Anhänge hochzuladen.
Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.

BB-Code ist an.
Smileys sind an.
[IMG] Code ist an.
HTML-Code ist aus.

Gehe zu


Alle Zeitangaben in WEZ +2. Es ist jetzt 15:14 Uhr.