[BeHo]

Zitat von pradi

Sollte er zumindest.

Bei Systempartitionen bin ich da halt eher vorsichtig - den Scan lasse ich vorerst mal.



Mittlerweile habe ich mal HDTune gestartet, aber leider zeigt das Tool unter Health nur N/A an.

HDD Health zeigt unter Health 100%.

Als letztes habe ich mir mal smrtctl runtergeladen, welches mir folgendes anzeigt:

smartctl version 5.38 [i686-mingw32-vista-sp2] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD5000BEVT-75ZAT0
Serial Number:    WD-xxxxxxxxxxxxx
Firmware Version: 01.01A01
User Capacity:    500.107.862.016 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Tue Nov 24 22:19:41 2009 MZ
SMART support is: Available - device has SMART capability.
                  Enabled status cached by OS, trying SMART RETURN STATUS cmd.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		 (13200) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 154) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x303f)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       1
  3 Spin_Up_Time            0x0027   184   183   021    Pre-fail  Always       -       1758
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       73
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   100   253   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       136
 10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       72
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       13
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       361
194 Temperature_Celsius     0x0022   112   098   000    Old_age   Always       -       35
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   100   253   000    Old_age   Offline      -       0
240 Head_Flying_Hours       0x0032   100   100   000    Old_age   Always       -       135
241 Unknown_Attribute       0x0032   200   200   000    Old_age   Always       -       852370890
242 Unknown_Attribute       0x0032   200   200   000    Old_age   Always       -       3860804807

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%         3         -
# 2  Short offline       Completed without error       00%         1         -
# 3  Short offline       Completed without error       00%         0         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Der Self Test im Short Mode zeigt Folgendes:

smartctl version 5.38 [i686-mingw32-vista-sp2] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%       136         -
# 2  Short offline       Completed without error       00%         3         -
# 3  Short offline       Completed without error       00%         1         -
# 4  Short offline       Completed without error       00%         0         -

Nach diversen Internetrecherchen bin ich noch nicht viel schlauer-Einerseits sieht es noch nach grünem Bereich aus aber andererseits lassen mich Werte wie bei Spin_Up_Time etwas ratlos zurück. Eine Value/Worst/Thresh-Angabe von 200/200/140 bei einem Raw-Wert von 0 verstehe ich auch nicht so recht.

Eine Systemsicherung werde ich demnächst auf jeden Fall mal machen. Hat jemand einen Tipp für eine möglichst günstige und sichere USB-Lösung um eine mit 320 GB gefüllte 500-GB-Platte zu sichern (zuverlässige Platte und zuverlässige(s/n) Gehäuse bzw. SATA-Anschlussadapter)?

Bei der Backupsoftware bin ich mir noch unsicher. Das schlanke Drive Snapshot klingt interessant - aber sooo günstig finde ich es jetzt auch nicht gerade.

Gruß
Bernd

P.S.: Es handelt sich um ein halbes Jahr altes Dell-Notebook mit 3 Jahren erweiterter Garantie. Um die Hardware mache ich mir nicht so sehr die Gedanken, aber darauf, schon wieder alle Programme neu zu installieren und aktivieren, hätte ich irgendwie gar keine Lust.