[Ölauge]

Hallo, heute ist der Haoda M42 eingetroffen. Hat etwas gedauert da der Zoll wieder neugierig war
Habe dan Adapter gleich mit einem 200mm Revuenon ausprobiert. Leider funktioniert die Sache nicht. 2 Bilder habe ich geschossen, wo alles geklappt hat (schärfe + piep)
aber zu 99% erhalte ich den Fehler 0x5b. Kennt sich jemand hermit aus? Ohne Adapter ist alles ok ..

Kaum macht mans richtig, funktioniert es auch ...

So hier nun die Anleitung die mir gefehlt hatte - Habe sie von Haoda bekommen. Dies klärt dann auch die Frage wie der Adapter funktioniert (War mal ein Thread hier vor ca. 2 Wochen.

For Minolta A-5D / Sony A-100 users
The aperture values are corresponding to
f/1.1 ---- 50mm
f/1.4 ---- 85mm
f/2.8 ---- 135mm
f/3.5 ---- 200mm
1. If you are using 50mm lens, no matter what is the max aperture of this lens and what aperture
you will use, set the max aperture as f/1.1 for your camera. A) Set your camera as off and
install the lens and adapter. B) Turn on your camera and half press the shutter release button
many times within 10 seconds until f/3.5 shows up. C) Wait 10 seconds. D) Turn off then turn
on your camera. Now the max aperture can only be set up to f/1.1. The focal length is 50mm
for the adapter.
2. If you are using 85mm lens, no matter what is the max aperture of this lens and what aperture
you will use, set the max aperture as f/1.4 for your camera. A) Set your camera as off and
install the lens and adapter. B) Turn on your camera and half press the shutter release button
many times within 10 seconds until f/1.4 shows up. C) Wait 10 seconds. D) Now the max
aperture can only be set up to f/1.4. The focal length is 85mm for the adapter.
3. If you are using 135mm lens, no matter what is the max aperture of this lens and what
aperture you will use, set the max aperture as f/2.8.4 for your camera. A) Set your camera as
off and install the lens and adapter. B) Turn on your camera and half press the shutter release
button many times within 10 seconds until f/2.8 shows up. C) Wait 10 seconds. D) Now the
max aperture can only be set up to f/2.8. The focal length is 135mm for the adapter.
4. If you are using 200mm lens, no matter what is the max aperture of this lens and what
aperture you will use, set the max aperture as f/3.5 for your camera. A) Set your camera as off
and install the lens and adapter. B) Turn on your camera and half press the shutter release
button many times within 10 seconds until f/3.5 shows up. C) Wait 10 seconds. D) Now the
max aperture can only be set up to f/3.5. The focal length is 200mm for the adapter.
NOTE: You only need to restart your camera to set 50mm lens in Step D.

Uwe